Reduce Costly Downtime

Rapp-It’s ability to perform effectively in emergency situations greatly reduces costly downtime and production loss, and because of the products ease of use, it can be applied by practically any apprentice applicator.
Because Rapp-It can produce a successful repair within 30 minutes, it should be made available to all maintenance staff within your industry. Rapp-It’s ability to perform effectively in emergency situations greatly reduces costly downtime and production loss, and because of the products ease of use, it can be applied by practically any apprentice applicator.

The Process

Rapp-It is simple to use and requires very little preparation.

1. Once the leaking area is identified shut down relevant pipes or hoses immediately.
2. Prepare the surface by roughening the pipe with emery paper or equivalent.
3. Apply the enclosed latex gloves.
4. Open aluminium foil pouch and immerse Rapp-It in temperate fresh water for 10 seconds
5. Remember the entire contents must be used once the package is opened.
6. It is important that Rapp-It is applied quickly as curing begins once the roll is taken out of the water.
7. Apply Rapp-It around the damaged area, expanding up to 50mm either side of the leak to ensure complete coverage.
8. Whilst wrapping, pull each layer tightly using your hand to mould and squeeze the layers together. Continue this action during and upon completion.
9. For best results, manufacturers recommend the completed application should be no less than 10mm in thickness.
10. Rapp-It is simple to use and requires very little preparation.